Post Hunt

Altered: Nozzle - Same Tap, 98% Less Water [2nd Run]

Experience mist with the worlds most extreme water saving nozzle. Don´t be a drainer. Only use what you need.

Suggested by Derrick Vennard

This hunt is currently collecting interest. Click request to show your interest and get notified when the hunt goes live!

Original MSRP: $76
24 / 25
requested for this
Share this Hunt:
Got questions? Email us at
Important: This particular hunt is a group pre-order for a crowdfunding project. By joining you agree that GroupHunt is a pure logistics facilitator and is not able to guarantee the final product and estimated delivery date as advertised by the creator, similar to if you were to place the pledge on your own. What we promise is to place the order on the group’s behalf, and to redistribute it once we have received the goods.

QUICK … what’s the single largest use of water in your house?

If you guessed the shower, you’d be right. 29% of the water you pay for comes from your shower head and into the drain.

And we’ve been bombarded from the relevant agencies on showering tips: 

  • Have shorter showers
  • Turn off the water when applying your soap
  • Share showers with your significant other ;)

And that’s all good…

But did you know where else you’re wasting bucket loads of water?

KITCHEN AND SINKS. Combined, they use 32% of water in an average household. That’s a third of your entire water use!

[From PUB website]

What if I said you could EASILY cut your kitchen and sink water usage by about 98%? 


Same tap. 98% less water. The Altered:Nozzle is the worlds most extreme water saving nozzle. It installs easily into your existing tap.

By atomizing the water we can use 98% less water and still retain full functionality. And if you need a little more, then you can twist the nozzle and enter regular saving mode for more water and 75% savings!

Mist & Save Mode
Mist & Save Mode
  • Fits into your existing tap.  
  • Super easy installation. 30 sec.
  • Pays for itself in a couple of months! 
  • Multiple finishes and sizes.   
  • Lead Free Eco Brass

Perfect for kitchen and bathroom taps everywhere. In your home, your boat, at the office, in your vacation home or wherever you have a tap and want to save water.  



PUB's advice has always more or less been either to 1. reduce the flow of water or 2. not use so much water. But that only works up to a point. When you're left with only a drizzle, you need a shift in technology.

We looked at the problem from another perspective. Instead of restricting water, we wanted to use as much of the water coming out of the tap as possible. The issue with regular taps is that you only use a fraction of the water coming out of your faucet. It bounces of the surface of your hands or plates. Or even worse, it just passes right by and straight down the drain.


When atomizing the water we break it up into millions of tiny droplets. Creating a high speed, heavy mist, shooting out of your tap. This increases the surface area of the water drastically and makes it possible for you to come in contact with almost all of the water coming out of your tap. 

 The result was even more extreme than we thought. We could have full functionality in washing hands, greens, doing dishes, brushing teeth etc, with only 2% of the water compared to a standard saving tap!

One big issue. 2% is not so great when it takes 2 minutes to fill a glass of water. That’s why we’ve developed a switch to a more regular Saving Mode. You still save 75% compared to your old tap, but you get all the water you need. Perfect for filling glasses, pots and pans. 

Being good to the environment should not have to mean being bad at design. The faucet is part of our interior design, something we spend a lot of money on. So if it doesn’t look good sitting at the end of your tap, then it’s just going to end up in some drawer. And there it won’t do much good at all.


That’s why we’ve spent a lot of time on the design of the Altered:Nozzle. We wanted it to stand out and make a statement, but at the same time it needed to look as an integrated part on a variety of different faucets. Finally we ended up with this drop shape. It clearly makes a visual statement at the same time as it makes it easy to switch between Mist and Saver Mode. 



First of all we think you should feel great about having saved the planet a bunch of water. But lets talk specifics. Even compared to the lowest limit of the Water Sense US standard, the Altered:Nozzle saves you up to 98%. And except for saving water, that means less energy and emissions to heat and transport the water. That is great for planet Earth. But it is also great for you. For an average household in Europe this translates to savings of €203/year. In US that number is around $255/year. Basically, you’ve just bought a great looking product that pays for itself within a couple of months.



After the Kickstarter campaign we will contact you so you can choose the finish and size you like for your very own Altered:Nozzle.The Altered:Nozzle will be available in the finishes below.





If you think it is difficult measuring your existing aerator, you can easily determine the size with the help of a nickel and dime. First remove the insert and washer from the inside of the aerator. Set a nickel on top of the aerator, and if it’s almost the same circumference, the aerator is a regular size. If it’s not a regular size aerator, use a dime. The dime will fit inside a junior size aerator and will sit on top of a Tom Thumb size aerator. 

The Altered:Nozzle fits into your existing tap and it takes less than 30 seconds to change it.

If we do the math and look at some of the most water stressed cities in the world, that means: 40 million gallons running through the taps in Los Angeles, 50 million gallons in Rio de Janeiro, 220 million in Tokyo and 240 million gallons in Shanghai. 

Every Day.
And most of it straight down the drain.


There are already millions of faucets in the world. That’s why we've developed the Altered:Nozzle to easily install into your existing faucet in just 30 seconds. By altering your existing faucet, rather than buying a whole new one, we get the same effect at a fraction of the cost. It also means lots and lots more people can buy our product. And that in turn means we can save a lot more water which is kind of the point. Saving money. Saving resources. Saving water. Sounds good to us!


Grouphunt Deal

Buying this straight from Kickstarter will set you back $76SGD. But when you buy with us and we gain access to the bulk orders, you can get it for $62SGD. So let's see it for what it is - Get 18% OFF something that will save you even more money!

Orders are being placed in groups of 10 so share this with all your friends who've just moved in to their own houses or have complained about high water bills or in fact, pretty much ANY homemaker!

Join the Hunt

  • Use 98% less water, or 75%. You get to choose with 2 different modes!
  • Easy application, installed within 30 seconds
  • Save 18% when you buy with Grouphunt, on a device that will save you even more!


Don’t be a drainer. Let’s tap out the drought!


Admin & Shipping Info
- This group order is for those residing in Singapore only. - For orders outside of SG, additional shipping may apply. Please drop us a note at - After the hunt ends, we will update everyone via email with details on shipping - Estimate ship date to SG is Jan 2017.
Additional Info: Original Link
There are no comments. Write the first one!
Write a new comment
BrowseHelp centerMarketplaceWork at GroupHunt